Since I had the transmission out of the car to do the 20V engine swap, I decided to rebuild the clutch slave & master cylinder. It’s a good idea to rebuild/replace both at the same time. Here’s the procedure for the slave. Pics of the rebuild kit from Toyota, Part # 04313-12030, ~$9: Removal of [...]
MK1 Clutch
-
Clutch Master Cylinder Rebuild
By Eric Southers
Some say rebuilding the clutch master cylinder is not worthwhile, that a rebuilt unit will still leak. However, I believe these problems ocurred because the actual cylinder wall was pitted and in bad shape no matter how good the new o-rings were. So, if you want, dismantle and inspect inside the cylinder before purchasing the [...]
View the original content on MK1 MR2 Write-ups
Page 1 of 11
