Midship Runabout

The Toyota MR2 Internet Archive

MK3 Clutch

How To: Bleed The Clutch

By WhyT


Bleeding The Clutch Tools: 8mm Wrench Air Compressor Power Bleeder Fluid Supply Bottle Lift or Jack/Jack Stands 1. Jack up car and set on jack stands. (Or use your lift) 2. Use the power bleeder to suck out most of the fluid in your Clutch Fluid Reservoir. 3. Fill Fluid Supply Bottle with clean fluid. [...]

  • ClutchMK3

    How to: Adjusting the Clutch Pedal

    By WhyT


    Adjusting The Clutch Pedal Ok I’ve read “Path To Shifting Nirvana” And it wasn’t quite clear to me on how to actually adjust the pedal. So I took some a picture and figured I would do it again. Tools: 12mm Wrench 14mm Wrench Flashlight/Worklight Pair of Regular Pliers 1. Loosen the 14mm lock nut on [...]

  • ClutchMK3

    How To: Change The Clutch Line

    By WhyT


    Changing The Clutch Line
    Tools:

    10mm Line Wrench
    12mm Line Wrench
    Regular Pliers
    Lift or Jack/Jack Stands

Disclaimer: This documentation in no way replaces the Toyota MR2 Repair Manuals. The purpose of this content is only to provide supplementary information to fellow MR2 enthusiasts. Midship Runabout and its contributing authors will not be held responsible for any injury or damages that may occur as the result of practicing any of the methods or procedures described within this website.

167 queries in 0.605 seconds