Welcome back to the SE garage, where our mistakes become your after-dinner conversation.
Rear swaybar installation parts list:
1. Addco 7/8 swaybar
2. 2sRus High and Tight rear endlinks
[...]
MK3 Suspension & Bracing
Rear swaybar install – guide
By Southerneditor
-
3.0 Bracing
By Aaronjb
Bear in mind that my car started off with a Corky’s breast plate already installed – so it’s a little tighter than a standard car. I’d expect to feel a little more difference from each of the mods I put on before the MSMB if I had no bracing at all.
All the official installation guides [...]View the original content on MR2 Roadster Owners Club
-
CUSCO FSTB Install Guide
By Southereditor
Welcome back to the SE Garage, where there ain’t no party like a supermod party ’cause ahttp://www.midshiprunabout.org/wp-admin/post.php?action=edit&post=1340 supermod party don’t stop!
Today we’ll answer the age-old question: Can you be too braced up? Let’s find out.
First, you’ll need a couple of templates. The ones that ship with the Cusco are for Japanese frunk plastics and don’t [...]
-
TTE Lowering Springs
By Emmanuel
Having recently fitted the TTE springs, I thought I’d share the experience and this article briefly describes the process I followed. Disclaimer: I and the club will not accept any responsibility if you follow the described process with negative results (i.e. damage your car and/or injure yourself). With that out of the way, I can [...]
View the original content on MR2 Roadster Owners Club
-
TRD Member Braces
By GSB
I just installed the TRD member braces on my car, and have a few bits to add to Whelps “how-to” on Spydermagazine.com
First of all the front brace:
Its a doddle, if you can use a trolley jack and a socket set its all over in 15 minutes. Take the old braces off, laugh at how feeble [...]Tags: bushings, install, remove, TRD
View the original content on MR2 Roadster Owners Club
Page 1 of 11
