This is a “how to” with some pictures that may assist in taking out our manual tranmissions. If your doing the removal yourself like I did you should alot 4 plus hours for your first time just to remove the tranny. It now takes me about an hour and half to drop my MT and [...]
MK3 Transmissions
-
Shift Cable Replacement
By Dev
Step one.
You should have everything apart and the key focus is the hard part which is passing the cable though.Step Two
You need to cut the cable here.The cable will now pass though this bracket so there is no need to remove it. If you chose to remove it good luck as there is a [...]
-
Speedsource Shifting Cable Bushings Install Guide
By Nelix
First of all a disclaimer- I am not a professional, merely an ungifted amateur. This guide is simply how I installed my shifting cable bushings and I accept no responsibility for any damage or accidents you incur if you choose to follow this guide.
These are designed to replace the oem rubber bushings in the engine [...]View the original content on MR2 Roadster Owners Club
-
C60 • MK3 • Transmissions
Gear Ratios
By Dustylax
US Spec Transmissions
00-05 Celica GT & MR2 Spyder – 5 speed – C56
1- 3.17
2- 1.90
3- 1.39
4- 1.03
5- 0.82
R- 3.25
Final Drive- 4.312Tags: 2ZZ-GE, 6-speed, CEL, gear ratios, transmission
View the original content on Spyderchat
-
Speedsource Transmission Shifter Bushings
By Southerneditor
Here’s a mod I’ve wanted to do as a component of Operation Total Shifting Excellence. As you know, the Spyder has a fairly loose shifter mechanism. You can eliminate play in the shifter by removing the rubber bushings under the shifter cage and replacing them with metal bushings. But there’s one last culprit left in [...]
Tags: 2ZZ-GE, bushings, remove, shifter, speedsource, transmission
-
Interior • MK3 • Transmissions
New Gear Lever Gaiter
By Roger
If you haven’t already got your new gaiter, then give Rhonsmr2 a PM on the Forum, or do a search for the [FS] post using “gaiter”. She can do new leather gaiters in different coloured leather (and stitching if you want) for both the standard and short shift gear lever.
I am pleased to say you [...]Tags: gaiter, gear level
View the original content on MR2 Roadster Owners Club
-
1ZZ-FE • 2ZZ-GE • Engines • MK3 • Transmissions
Kirk’s Motor Mounts Install
By Southerneditor
I knew that there would be an initial period of vibration post-install, but that it would calm down eventually. The only thing I was missing was an illustration of what, exactly, one is supposed to do with the inserts. In case you’ve been wondering about that, here’s the rundown:
Put the back of the car on [...]
Tags: CEL, ECU, install, kirk, motor mount, pe, pedal, remove, reset, test
Page 1 of 11
