I picked up some K-Sport Coilovers from voiceofid on the MR2OC Forums. They have threaded tubes that allow you to raise or lower the car without losing spring/strut travel. The …

In order to quiet down my new exhaust, I picked this up off eBay, almost ordered the 2.25″ one, so make sure you get the right size. The valve opens …

After installing my coilovers, I had near positive camber on my front wheels, and thought it necessary to correct this. There are two way that I know of to do …

Forward: We do NOT reccommend drilling into your ex. manifold with it on your car. Shane and Pat pulled the motor shortly after, and when Shane pulled the head, he …

Part # THE-15001 from Summit Racing.
Basically you make some measurements of the turbine dimensions, and then cut out the blanket and wrap. Then you stitch up the blanket with some …

Fuel Line upgrade to AN fittings and braided lines.
 
Parts were all ordered from Summit Racing.
For the section between the fuel tank and stock fuel filter, I used 21.5 inches of …

Here are some tips and info on how to degree cams for the 3SGTE. This article does not cover cam install, just the degreeing process for aftermarket cams. If you …

Invincashield is a product made by 3M. This product goes by other names, and/or is made by other brands (ie Stongard).
You can find some info on a MR2 Spyder specific …

The purpose of this mod is to allow the underbody airflow to hit the front of the oilpan, and carry away some of the heat in the oil. The mod …

Since I plan to run some quicker times this year, I thought it would be a good idea to pick up a set of Axle upgrade parts from ATS Racing. …