20v
Changes that need to be made to accommodate the 20v by system 1. Exhaust -Silvertop The complete 16v exhaust system can be used with the 20v silvertop. The only needed modification will be to the outermost flanges of the stock 16v header (pictures are of an ae86 header, but the bolt patern is the same) [...]
View the original content on International MR2 Owners Club
Here are the results: 137whp & 111wft-lbs. This is with 103 octane unleaded gas. I don’t really trust the A/F ratio measurements. The tool they use for that is a little suspect, since it was barely even stuck in the tailpipe. After the dyno, I used a friend’s wideband O2 and the results were much [...]
View the original content on MK1 MR2 Write-ups
Disclaimer: This documentation in no way replaces the Toyota MR2 Repair Manuals. The purpose of this content is only to provide supplementary information to fellow MR2 enthusiasts. Midship Runabout and its contributing authors will not be held responsible for any injury or damages that may occur as the result of practicing any of the methods or procedures described within this website.