distributor
Here is a quick write up on how to change your distributor cap and rotor. This was done on a 93T with no egr system which may make it a little easier than those of you who still have your egr.
Tags: cap, distributor, rotor
View the original content on International MR2 Owners Club
1) Norm: To start with, turn the engine to top dead center (always do this to pull the distributor). You do that by making sure the “0″ timing mark on the pulley lines up with the marker pin. Then look down in the oil filler hole. You should see a dimple in the intake cam. [...]
Tags: distributor, install, o rings
View the original content on MK1 MR2 Write-ups
Disclaimer: This documentation in no way replaces the Toyota MR2 Repair Manuals. The purpose of this content is only to provide supplementary information to fellow MR2 enthusiasts. Midship Runabout and its contributing authors will not be held responsible for any injury or damages that may occur as the result of practicing any of the methods or procedures described within this website.