strut
Tools needed:
* Various sockets, wrenches, pliers & ratchet
* Cheater bar for those stubborn nuts & bolts
* Bench Vice
* Monkey wrench or large channel locks
* Dremel tool (maybe, see step 6)
* Spring insulators x2
* Bumpstops x2
Tags: adjust, install, removal, remove, spring, springs, strut, sway
View the original content on MK1 MR2 Write-ups
Some of these pics are out of order, so you may see a belt in a pic that should have been removed, or a timing cover. I took these pics over a time period of 2 months. This work was done on Pat’s first MKIIT which had been sitting for exactly one year before the [...]
Tags: adjust, belt, CEL, engine, guide, install, removal, remove, reset, service, strut, tensioner
View the original content on MKII MR2 Mod Project
This article is a mish mash of several other articles, and many clutch installs. I put this here to help someone perform their first clutch job, and is not intended to replace the BGB. If something I’ve shown differs from the BGB, go with the BGB instructions. Remove the Starter. There are some electrical connectors [...]
Tags: adjust, cleaning, Clutch, drain, drop, engine, install, remove, strut, sway, swaybar, transmission
View the original content on MKII MR2 Mod Project
Finally, started redoing the entire suspension in the car. I went ahead and removed the strut assemblies first, that way this writeup is more meaningful.
Tools needed:
* Various sockets, wrenches, pliers & ratchet
* Cheater bar for those stubborn nuts & bolts
* Spring compressor
* Bench Vice
* Monkey wrench or large channel locks
* Dremel tool (maybe, see step 4)
Tags: adjust, ECU, install, removal, remove, spring, springs, strut, struts, sway, TRD
View the original content on MK1 MR2 Write-ups
3S-GTE • Engines • Forced Induction • MK2
Shane Craddock (Gecko 2) had decided to fix an oil leak on his MKII Turbo engine. The leak appeared to be in the headgasket area, and having pulled the head from inside the car once before, Shane felt that it would be much less of a pain in the *** to drop the engine than [...]
Tags: Clutch, drain, drop, engine, remove, shifter, strut
View the original content on MKII MR2 Mod Project
Disclaimer: This documentation in no way replaces the Toyota MR2 Repair Manuals. The purpose of this content is only to provide supplementary information to fellow MR2 enthusiasts. Midship Runabout and its contributing authors will not be held responsible for any injury or damages that may occur as the result of practicing any of the methods or procedures described within this website.