Midship Runabout

The Toyota MR2 Internet Archive

• Home
• MR2
• MK1
• MK2
• MK3
• Events
• Online Store
• Shop Locator

• 3S-GTE • Engines • Forced Induction • MK2 • Tuning

  Tuning the MR2 Turbo

  By Joseph Obernberger

  

  
  

  This article hopes to describe the tuning process used in the LoveHorsepower Fuel Pressure Regulator and Tuning Video guides. The following equipment was installed: Apex-i S-AFC (Super Air Fuel Controller). LoveHorsepower Fuel Pressure Regulator Kit (Aeromotive Fuel Pressure Regulator). Innovate Motorsports LC-1 Wideband Lambda Cable (Wideband Oxygen Sensor Kit). LoveHorsepower Stage Two Water Injection. 550cc/min [...]

  Tags: ECU, forced induction, Tuning, turbo

  View the original content on Lovehorsepower.com

  
  

• 3S-GTE • Forced Induction • MK2

  AutoLab Level 2 Turbo Kit Installation

  By Joseph Obernberger

  

  
  

  This page contains notes and pictures for the installation of the Autolab Level 2 turbo kit. This kit contains the following components:

  T3/T4 50trim water cooled Garrett turbocharger

  Tial wastegate

  Necessary fittings/gaskets for wastegate

  Manifold

  Tags: AutoLab, AutoLAB Level 2 Turbo kit, engine, install, installation, kit, remove, turbo

  View the original content on Lovehorsepower.com

  
  

• 3S-GTE • Forced Induction • MK2

  MR2 Turbocharger Installation

  By Joseph Obernberger

  

  
  

  These are just some notes on installing the stock turbocharger back into the MR2.  I start out by loosely bolting the turbo oil pipe to the turbocharger (two 10mm bolts).  The dump pipe (downpipe) is not installed.  If the turbocharger stay bracket was removed, I would leave it off, and install it later, but if [...]

  Tags: engine, installation, turbo, turbocharger

  View the original content on Lovehorsepower.com

  
  

• 3S-GTE • Engines • Forced Induction • MK2

  MKII Turbo Engine Install Pics

  By Pat Signorino & Shane Craddock

  

  
  

  Kinda disjointed article here. But, basically, once Shane had gotten the engine back together after cleaning and replacing many parts, we rolled the engine under the car, put the hoist over the engine compartment, hooked it up, and started lifting the giant heat pump known as the 3SGTE into the car. Things were made easier [...]

  Tags: cleaning, drop, engine, install, turbo, turbocharger

  View the original content on MKII MR2 Mod Project

  
  

Article and photo submissions are property of the contributing author. Design and development © 2012 Midship Runabout | Log in